Projectiondesign F3 XGA-6 Guía de usuario descargar pdf (Pagina 26)

english

MENU SYSTEM

CONTROL SUB MENU

mode

Selects between RS232 and X-PORT control modes.

RS232 address

For use when daisy-chaining several units. Select auto or fixed

address. Only one address scheme is allowed per daisy-chain. The

auto address is allocated following the relative position in the daisy-

chain. The fixed address is an absolute address. Only unique fixed

addresses are allowed.

RS232 fixed

Select a unique fixed address in the range available.

baudrate

Selects between baudrates 4800, 9600 and 19200. A lower baudrate

may be required in installations with long cable runs.

RC ID

Select address for individual remote control. By selecting an individual

address, the projector will only react when this address is issued from

the remote control

mode RS232

RS232 Address auto fixed

RS232 Fixed 1

baudrate 19200

RC ID 0

FOR ALL

Downloaded From projector-manual.com Projectiondesign Manuals

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Sin comentarios

Projectiondesign F3 XGA-6 Guía de usuario Pagina 26