Projectiondesign F3 XGA-6 Guía de usuario descargar pdf (Pagina 19)

english

USING THE PROJECTOR

After setting-up, switch on all equipment.

The projector can be controlled by the keypad on the rear, by the

remote control or using the RS232 or LAN interfaces.

When using the remote control, either all or select individual units may

be addressed, see the CONTROL sub menu - RC ID. By activating the

RC ID, individual control of units in a multiple-unit set-up is then made

possible.

To switch the projector on, firmly press the POWER button on the

keypad or the remote control. The STATUS indicator will turn from

yellow to green when the unit is switched on. The keypad will light up

so that all available functions are yellow. Functions not available will

have no light. Selected functions will turn green.

If the STATUS indicator is flashing yellow, please wait until it turns

permanent yellow.

When only one source is connected, the projector will auto-detect that

source. If more sources are connected, the projector will search for the

next active source according to the following list, provided that

SOURCE SCAN is set to ON in the SET UP sub menu (see description

of menu system):

- VGA

- BNC

- DVI-D

- YPbPr (Component)

- S-Video

- C-Video

Select between the sources by pressing the SOURCE buttons on the

keypad or the remote control. Only sources that are active will be

displayed.

If no source is active, searching messages will appear on the screen.

If no source is active for a long time, the projector will go in standby

mode if DPMS (power save) is set to ON in the SET UP sub menu. The

STATUS indicator will turn from green to flashing yellow, then yellow.

The projector will be switched back on if at least one source is

(re)activated. The power-down function can be disabled in the menu.

See DPMS in the SET UP sub menu.

To switch the projector off, firmly press the POWER button on the

keypad or the remote control twice (to confirm that you really want to

switch off the unit). The STATUS indicator will turn from green to

flashing yellow, then yellow when switched off.

You may not switch the unit on while the STATUS indicator is flashing

yellow. Please wait until the indicator is permanent yellow.

mode RS232

RS232 Address auto fixed

RS232 Fixed 1

baudrate 19200

RC ID 0

keystone V 0

keystone H 0

IR control press

DPMS on off

source scan on off

orientation desktop front

OSD

language

RGB Video off

CONTROL SUB MENU

SET UP SUB MENU

Downloaded From projector-manual.com Projectiondesign Manuals

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comentarios a estos manuales

Sin comentarios

Projectiondesign F3 XGA-6 Guía de usuario Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos Projectiondesign F3 XGA-6